Backlighting the lcd, Setting the monitor override function – Rockwell Automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTAM) User Manual
Page 28
Advertising
3-6
Module Setup Procedure
Publication 1747-6.1
Backlighting the LCD
This selection controls the illumination for the LCD. The default
selection is On:
• To toggle between On and Off:
Press [
,1&
] or [
'(&
].
• To accept the setting:
Press [
(17(5
].
Setting the Monitor
Override Function
The Monitor Override feature allows you to write to selected data file
addresses while in the Monitor mode. Refer to chapter 5, Monitoring
and Modifying Data and chapter 6, Quick Recall Functions. The
default selection is Off:
• To toggle between On and Off:
Press [
,1&
] or [
'(&
].
• To accept the setting:
Press [
(17(5
].
Set Backlighting
ON
Monitor Override
OFF
Advertising