Rockwell Automation 1747-DTAM-E,D17476.1 Data Table Access Module (DTAM) - Manual (Page 53)

Quick Recall Functions 6-3
Publication 1747-6.1
Clearing Quick Recall
Functions
To erase Quick Recall Function F(1), make sure that no data file
address is displayed (otherwise you will re-define the Recall Function
or Macro):
1. Configure the module for the Modify mode.
2. With either Ready screen displayed:
Press >6+,)7@ >) @ >) @ >@ >(17(5@
.
3. The LCD displays the following for three seconds:
4. The display returns to the previous screen.
5. You may now perform any of the module functions.
RDY> 4 RRUN
Macro 1 Cleared