Press ok, Change the decimal separator for numeric formats, Enter up to three characters for the new separator – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 109: Click ok
Advertising
Publication 2711P-UM001J-EN-P - November 2009
109
Configuration Mode Chapter 4
3. Press OK.
The selected language will appear at the bottom of the Regional
Settings screen.
Change the Decimal Separator for Numeric Formats
You can change the decimal separator used in numerics for the
current language. The default decimal separator is a period.
1. Select Terminal Settings>Time/Date/Regional Settings>Regional
Settings>Numeric Format.
The field shows the default decimal separator. The field will
accept a separator up to three characters.
2. Enter up to three characters for the new separator.
3. Click OK.
Advertising