Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 111)

Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013 111
Windows CE Operating System Chapter 4
FTP Connection Requiring User Authentication
Follow these steps to establish
an FTP connection to the
terminal by first entering a
valid user name and password.
1. Open your web browser
or any folder on your
computer.
2. Type the IP address of the HMI terminal in the address field by using the
syntax ftp://ipaddress_of_hmi_terminal.
ftp://90.95.80.8
3. Click OK when you see the FTP Folder Error dialog box.
If you launch the FTP connection from your browser, a prompt can appear
notifying you that Internet Explorer cannot display this web page. Choose
Page>File>Open FTP site in Windows Explorer.
4. From the File menu, choose Login As.
The user name field is populated with the first user name entered in the
User List of the FTP configuration.
5. Type a valid user name and password, then click Log On.
The default FTP directory on the terminal opens. You can transfer files to
or from this folder.
TIP The user name you enter must be in the User List of the FTP configuration and
previously set up as a valid account in the User Accounts application.