Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 19)

Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013 19
Overview Chapter 1
Operator Input
All 700 to 1500 display modules have TFT color, graphic displays with either
keypad, touch screen, or combination keypad/touch-screen input. Common
features and firmware provide for easy migration to a larger display:
• Eight-wire resistive touch screens are extremely accurate for operator
interfaces. When a point on the touch screen is pressed, the layers connect
and change the electrical current, which is then registered and processed.
• All keypad or combination keypad/touch-screen displays are similar except
for the number of functions keys.
To meet the requirements of specific environmental conditions, high-bright
displays, marine-certified displays, and conformal-coated displays are also
available. Plus, you can order field replaceable bezels.
5
1
2
1
2
4
3
ATTENTION: Use a finger or gloved finger to operate the keypad. To operate the
touch screen, use a finger, gloved-finger or plastic stylus with a minimum tip
radius of 1.3 mm (0.051 in.). Using any other object or tool can damage the
keypad or touch screen.
ATTENTION: Do not carry out multiple operations simultaneously. Doing so can
result in unintended operation:
• Touch only one operating element on the screen with one finger at one time.
• Press only one key on the terminal at one time.
Table 9 - Display Features
Item Feature Description
1 Replaceable ID Label Product identification label can be replaced with custom label.
2 Display Analog resistive touch screen applies to touch-screen or combination
keypad/touch-screen terminals.
3 Numeric keypad 0…9, –, Backspace, Enter, Left and Right tab, Shift, Esc, Ctrl, Alt keys.
4 Navigation keys Use arrow keys for navigation. Use Alt+arrow to initiate these functions:
• Alt+left arrow (Home), Alt+right arrow (End)
• Alt+up arrow (Page Up), Alt+down arrow (Page Down)
5 Function keys
700 F1
…F10, K1…K12
1000 F1 …F16, K1…K16
1250 F1 …F20, K1…K20
1500 F1 …F20, K1…K20
Keys that can be configured in the application to perform operations. For
example, F1 can be configured to navigate to another screen.
Replaceable legends are available to customize the function key labels.