Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 74)

74 Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 3 Configuration Mode
Check Integrity of
Application Files Periodically check the integrity of the FactoryTalk View ME Station application
that is loaded in the terminal and the runtime files. Al l errors, warnings, and
information messages generated by these files are logged to a file. You can
periodically view the log and clear all items from the log.
1. Press Terminal Settings>File Integrity Check.
2. Press either of the Enable options to enable or disable file integrity checks:
• Enable Check of the MER
• Enable Check of the Runtime Files
By default, integrity checks are automatically performed on the application
.mer file and runtime files. If you disable either of these functions, the files
are not checked and the log file is not updated.
3. Press OK to save changes.
Follow these steps to view the file integrity check log.
1. Press View Log from the File Integrity Check dialog box.
2. Select an event and press More Details to display details for a specific file
check event.
3. Press Clear All to clear all details from the log.
4. Press Close to return to previous dialog box.