Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 18)

18 Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 1 Overview
Configured Terminals
A configured terminal, ordered as a single-catalog number, has a display module
and logic module.
An optional DH+/DH-485, ControlNet, or Ethernet communication module
can be added later for additional network capabilities.
1
2
3 4
5 6
7
8
10
9
Table 8 - Logic Module Features
Item Feature
1 Network interface connector for optional communication module
2 AC or DC power input
(1)
• Isolated 18…32V DC
• 85…264V AC
(1) For DC applications using AC power, an external, remote AC-to-DC power supply, cat. no. 2711P-RSACDIN, is
available for DIN-rail mounting.
3 Ethernet port for controller communication, 10/100 BaseT, Auto MDI/MDI-X
4 RS-232 serial port for file transfers, printing, and controller communication
5 Two USB 2.0 high-speed (type A) host ports for attaching USB devices including mouse,
keyboard, printer, and USB drives that are hot-swappable in nonhazardous locations
6 One USB 2.0 high-speed (type mini- B) device port for connecting a host computer
7 Reset switch to reset the terminal without having to power on and off
8 Default switch to access maintenance operations such as restoring factory defaults
9 Indicators provide communication and fault status
10 Secure Digital (SD) card slot supporting cat. no. 1784-SDx cards