Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 112)

112 Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 4 Windows CE Operating System
File Server Configuration
The File Server tab in the Network Server Configuration dialog box provides
settings that allow shared access to files, printers, serial ports, and miscellaneous
communication between computers on a network. These are standard Microsoft
Windows CE parameters.
KEPServer Configuration
The KEPServer tab in Network Server Configuration lets you select Kepware
communication drivers for a connected device.
TIP Always click OK to apply new settings. You are asked if you want to restart the
service immediately.
Table 56 - File Server Configuration
Parameter Description Default
General
Adapter List Provides a list of valid adapters. * (all adapters)
Max Printer Swap Size Specifies the maximum size of the printer swap file. 4096 bytes
Security Options
Use Authentication Check this option to require a valid NTLM user name and
password to access the file server.
If authentication is enabled, you must enter one or more
valid user names in the User List field.
NTLM user accounts are defined in the User Account
Manager of the control panel. Disabled (unchecked)
User List Specifies a list of valid NTLM users allowed to access the
file server.
When selected, you can enter a list of NTLM user names,
separated by semicolons, in the field that opens at the
bottom of the dialog box. User names and passwords are
defined in the User Account Manager of the control panel. None
TIP Always click OK to apply new settings. You are asked if you want to restart the
service immediately. You must also reset your terminal.