Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 3)

Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013 3
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information This table contains the changes made to this revision. Most of the updates are the
result of adding the new generation PanelView
™ Plus 6 - 400 and 600 terminals
to the publication.
Topic Page
Updated operating system features table 12
Added terminal features for 400 and 600 terminals 14
Add new catalog numbers for 400 and 600 terminals 20
Added reference to new Ethernet communication module for
700 to 1500 terminals 17, 23, 60, 62, 140
Updated accessories to include those for 400 and 600 terminals 22
Updated temperature codes to include those for the 400 and 600 terminals 28
Added panel cutout dimensions for 400 and 600 terminals 30
Added product dimensions for the 400 and 600 terminals 31
Added installation procedure for 400 and 600 terminals 33
Added procedure for removing terminal block 37
Updated power connections for 400 and 600 terminals 38…42
Updated Server Support table for the 400 and 600 terminals 87
Updated Windows Control Panel table 89
Added battery replacement procedure for 400 and 600 terminals 130
Added procedure to install AC power supply module for 400 and 600 terminals 132
Updated the USB Ports section to include the 400 and 600 terminals 138
Updated the Ethernet Connections section to include the 400 and 600 terminals 140
Updated tables in the Connections to Controllers section 151
Updated the Firmware Upgrade chapter to include the 400 and 600 terminals 153
Moved information on outdoor installation for high-bright module display 177