Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 11)

Publication GMSI10-UM025C-EN-P - August 2010
Introduction 3
• XM-160/161/162 Direct Vibration Module - The module mounts on
the XM-947 terminal base via a keyswitch and a 96-pin connector. The
module contains the measurement electronics, processors, and serial
interface port for local configuration.
Using this Manual This manual introduces you to the XM-160, XM-161, and XM-162 Direct
Vibration modules. It is intended for anyone who installs, configures, or uses
the XM-160, XM-161 and XM-162 Direct Vibration modules.
Organization
To help you navigate through this manual, it is organized in chapters based on
these tasks and topics.
Chapter 1 “Introduction” contains an overview of this manual and the
XM-160, XM-161 and XM-162 modules.
Chapter 2 “Installing the XM-160/161/162 Direct Vibration Module”
describes how to install, wire, and use the XM-160, XM-161 and XM-162
modules.
Chapter 3 “Configuration Parameters” provides a complete listing and
description of the XM-160, XM-161, and XM-162 parameters. The parameters
can be viewed and edited using the XM Serial Configuration Utility software
and a personal computer.
Appendix A “Specifications” lists the technical specifications for the XM-160,
XM-161, and XM-162 modules.
Appendix B “DeviceNet Information” provides information to help you
configure the XM-160, XM-161, and XM-162 over a DeviceNet network.
Appendix C “DeviceNet Objects” provides information on the DeviceNet
objects supported by the XM-160, XM-161, and XM-162 modules.
IMPORTANT
Up to two XM-441 Expansion Relay modules may be
connected to the XM-160, XM-161, or XM-162 module via
the XM-947 terminal base.
When connected to the module, the Expansion Relay
modules simply “expand” the capability of the XM-160,
XM-161, or XM-162 by providing a total of up to eight
relays. The Direct Vibration module controls the operation
of the Expansion Relay modules.