Rockwell Automation 1440-SPD02-01RB XM-220 Dual Speed Module - Manual (Page 103)

Publication GMSI10-UM004B-EN-P - May 2010
DeviceNet Objects 95
1 The Poll Connection Produced Connection Path and Size parameters cannot be set while the Poll connection is
already established with a master/scanner. Attempting to do so will result in an "Object State Conflict" error
(error code 0xC). These Parameter instances are a little more flexible than the actual Connection Object
attributes because they can be set while the connection is in the NON-EXISTENT state (before the
master/scanner allocates the connection).
11 No Relay 3 Alarm Identifier B USINT 0 = CH 1 Speed Alarm
1 = CH 2 Speed Alarm
2 = CH 1 Accel Alarm
3 = CH 2 Accel Alarm
4 = CH 1 Zero Speed Alarm
5 = CH 2 Zero Speed Alarm
6 = CH 1 Locked Rotor Alarm
7 = CH 2 Locked Rotor Alarm 1
12 No Relay 4 Alarm Identifier B USINT 0 = CH 1 Speed Alarm
1 = CH 2 Speed Alarm
2 = CH 1 Accel Alarm
3 = CH 2 Accel Alarm
4 = CH 1 Zero Speed Alarm
5 = CH 2 Zero Speed Alarm
6 = CH 1 Locked Rotor Alarm
7 = CH 2 Locked Rotor Alarm 1
13 No Relay 5 Alarm Identifier B USINT 0 = CH 1 Speed Alarm
1 = CH 2 Speed Alarm
2 = CH 1 Accel Alarm
3 = CH 2 Accel Alarm
4 = CH 1 Zero Speed Alarm
5 = CH 2 Zero Speed Alarm
6 = CH 1 Locked Rotor Alarm
7 = CH 2 Locked Rotor Alarm 1
14 No Poll Connection Produced
Connection Path
1
USINT 101 - 103, 199 (Assembly
Object instance number) 101
15 No Poll Connection Produced
Connection Size
1
UINT 4 -124 32
Table C.23 Parameter Object Instances
Instance
Read
Only
Name Data Type Valid Values Default Value