Rockwell Automation 1440-SPD02-01RB XM-220 Dual Speed Module - Manual (Page 111)

Publication GMSI10-UM004B-EN-P - May 2010
DeviceNet Objects 103
Services
Setting the attributes of this object are not affected by the status of the Device
Mode Object.
1 Attributes can only be set while the device is in Program Mode. See the description of the Device Mode Object
for more information.
11 Get/Set Alarm Identifier
B EPATH Identifies the second
alarm status the relay
monitors. See Parameter Object instances
9 to 13.
12 Get/Set Logic USINT Indicates the number of
associated alarms that
must have a status value
specified by Alarm Level
in order to activate the
relay. 0 = Ignore Alarm Identifier B
and activate the relay based on
the status of Alarm Identifier
A.
1 = Activate the relay if the
status of either Alarm
Identifier A or B matches any
of the statuses specified by
Alarm Level.
2 = Activate the relay if the
status of both Alarm Identifier
A and B match any of the
statuses specified by Alarm
Level.
14 Get Relay Installed BOOL Indicates whether an
actual relay is associated
with this instance. 0 = Not installed
1 = Installed
Table C.34 Relay Object Instance Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
Table C.35 Relay Object Services
Service
Code
Class/Instance Usage Name Description
05
h
Class/Instance Reset Resets latched relay(s).
0E
h
Class/Instance Get_Attribute_Single Returns a single attribute.
10
h
Class/Instance Set_Attribute_Single
Sets a single attribute.
1