AJA FS1 - Manual (Page 27)

1
1
Chapter 3:
Installation & Configuration
3
Installation Overview
The installation and set up of an FS1 is very simple. Plug both AC supply cords into
AC mains power, connect the LAN connector to a LAN, WAN or local computer
with a web-browser, and then connect source and destination video and audio
equipment.
Warning: Do not open the chassis. There are no user-serviceable parts inside.
Hazardous voltage is present inside the unit, presenting a risk of electric shock or
serious personal injury. Opening the chassis will void the warranty unless performed
by an AJA service center or licensed facility. Remove the two supplied AC line cords
from mains power when moving the unit. Do not defeat the safety purpose of the
grounding-type plug.
Warning: To meet safety regulations for leakage current, connect the FS1 dual
power supplies to separate branch circuits.
All of the steps of Installation and Configuration are documented in this chapter,
summarized as follows:
1. Unpack the shipping box, removing the FS1 and two power cords.
2. Connect the FS1 to power, connecting the two power cords to mains AC.
WARNING
WARNING