AJA FS1 - Manual (Page 39)

1
1
Chapter 4:
Parameter Menus
4
Controlling the FS1 via Its Front Panel Parameter Menus
There are three ways to control the FS1: remotely from a web browser, using a
remote control panel, and using front panel Select/Adjust buttons and Parameter
Menus. This chapter deals with the latter—the most direct and all inclusive way to
configure an FS1.
In Chapter two we discussed the panel controls overall, so ensure you’ve read and
understand that material first. Here in this Chapter we discuss each of the parameter
menus and their usage.
In each parameter screen we discuss the Parameter Number and Name on the top
line of the display and the Parameter Setting(s) possible as shown on the bottom line
of the display; remember, the current setting is what is shown.
As mentioned in Chapter 2, the Parameter Menu is entered whenever any of the
Select or Adjust buttons are pressed. Here is the general Parameter Menu display:
Pressing either a parameter Select or parameter Adjust button—while on the Status
or Screen Saver displays—changes the display to the last remembered Parameter
Adjust menu. If you’re already viewing a Parameter Menu, pressing
a Select or Adjust button causes a change to the next item.
Parameter Number and Name
Current Parameter Setting