AJA FS1 User Manual
Page 83
1
75
FS1 Installation and Operation Manual — Remote FS1 Control Via a Web
Audio Output choices. For example, if the Level control is not set to Unity, then controls
will appear allowing you to set the levels of the eight channels.
Audio Follow Video (4.5)—This parameter determines whether audio settings are
remembered for each video input.
OFF (default)
ON
Normal operation. Audio settings must be made separately from any video settings;
they are not associated automatically.
The FS1 remembers the audio settings associated with the currently selected input.
Whenever an input is selected, the corresponding audio settings will be recalled.
This allows you to set up specific audio settings for the different video inputs (i.e., perhaps
the SDI 1 has a specific embedded audio channel mapping while the component video
input might always use AES audio input).
Audio Follow Video applies to these
parameters:
Audio Follow Video does not apply to
these parameters:
•
2.2 Audio Input
•
2.11—2.18 Audio Map
•
2.21—2.24 Audio Map (Stereo)
•
4.2 Audio Delay
•
4.4 Sample Rate Convert
•
20.0 Audio Output Levels
•
20.1—20.8 Audio Level Ch (n)
•
21.0 Audio Output Phase
•
21.1—21.8 Audio Phase Ch (n)
•
4.1 Analog Audio Std
•
4.3 Audio Out