AJA FS1 - Manual (Page 78)

70
General Screen
Information All FS1 web screens have certain areas in common. On the left of each screen is a
navigational list of the available FS1 screens. Click any of these items to jump to that
screen. At the top of each screen you’ll also find a heading showing the connection status
and IP address in addition the FS1’s serial number and software version. This latter
information is useful if you ever have to call AJA Technical Support to discuss a problem
or get help. In the middle of each screen there menu choices and information pertaining
to the subject matter of that screen (i.e., the “Audio and Video I/O” screen has choices
about audio and video).
FS1 web screens closely mirror the parameter menus displayed on its front panel. In
each of the screens presented on the following pages, we’ll list the parameter menu
numbers that are related. Also, to make things easier for you to reference, we’ll list the
definitions redundantly here so you don’t have to flip back and forth between chapters.
FS1 Web Interface, Main Status Screen
Controlling
Multiple FS1s From the Network screen, you can at-a-glance see all of the FS1 devices present on the
same local LAN as the current FS1 you are controlling. At the bottom of the screen
under “Available FS1s—Click to Refresh”, the system names of all FS1s on the LAN are
listed. Clicking on any of these will bring up the Status screen of that FS1. Note: the
FS1 you control may be running a different software version so screens may look
different. As a rule, it’s wise to have all your FS1 devices running the most current
software and the same version. Also, you must have a properly configured default
gateway to see the FS1s.
Note: If the Default Gateway (parameter 50.4) is not configured properly, other FS1s
will not be visible here. If it displays “No FS1’s found” then check the gateway setting.
FS1 S/N, software version, and connection status
List of FS1 Screens:
Click one to Display
that Screen Pull-down menu choices