AJA FS1 - Manual (Page 40)

32
The parameter Select buttons to the right of the display select a parameter to view
or modify.
Pressing one of the parameter Adjust buttons changes the current parameter’s value
to a new one from the FS1’s list of choices—repeating the list if you continue to
press Adjust—or adjusting a numerical value up or down. The exact choices
displayed will vary depending on the parameter. Most adjustment choices made
with the Adjust buttons take effect immediately and will be subsequently stored
into the FS1s non-volatile memory if they remain unchanged for 3 seconds.
If a Select or Adjust button is held down continuously, the changes will begin to
happen automatically - with acceleration if applicable.
Pressing either a Select or Adjust button-while on the Status or Screen Saver
displays-changes the display to the last remembered Control menu.
Holding down both the Adjust (up) and Adjust (down) buttons—at the same time
—will set that parameter back to its factory default value.
The remaining topical headings in this chapter list all of the Parameter Menus by
number and name. The number shows the order in the menu navigation system:
pressing the up or down Select button shifts you numerically up or down in the
order of their assigned parameter numbers. The name is what you’ll see in the
Parameter Menu display (for example, the first heading listed here is “1.1 Output
Format” which is exactly what you’ll see in the top line of the display when
viewing this parameter).
1.1 Output Format
This parameter defines the output format of SDI 1. Depending on other
parameters and settings, it may also apply to SDI 2 and the Component Video
output.
Notes:
1. Available rates that are listed here are dependent on what has been chosen in the
3.3 Frame Rates parameter setting.
Select Adjust
1.1 Output Format Description of Choices
Parameter Adjustments:
Follow Input (Default)
Follow Ref
SD <sd_rate>
HD 720p <hd_rate1>
HD 1080i <hd_rate1>
HD 1080psf <hd_rate2>
Follow the format of the selected input
Follow the format of the reference video input (Ref)
Select standard definition (available SD rates are listed choices)
Select HD 720p (available rates are listed choices)
Select HD 1080i (available rates are listed choices)
Select HD 1080psf (available rates are listed choices)