AJA FS1 - Manual (Page 82)

74
The Audio Follow Video control is also on the Audio Control screen.
Side Bar Keyer Source (7.1)
Side Bar Edge(7.2)
Note: please read the discussions in Chapter 4, Parameter Menus, for 7.1 Sidebar
Keyer and 7.2 Sidebar Edge for complete information on usage of the Sidebar keyer.
Audio Control
Screen This screen offers settings for a variety of audio-related functions, including turning
AFV on and off, saving AFV settings for any selected video input, and changing channel
adjustments (level and phase). The actual appearance of this page can change, reflecting
Audio Follow Video applies to these
parameters:
Audio Follow Video does not apply to
these parameters:
• 2.2 Audio Input
• 2.11—2.18 Audio Map
• 2.21—2.24 Audio Map (Stereo)
• 4.2 Audio Delay
• 4.4 Sample Rate Convert
• 20.0 Audio Output Levels
• 20.1—20.8 Audio Level Ch (n)
• 21.0 Audio Output Phase
• 21.1—21.8 Audio Phase Ch (n)
• 4.1 Analog Audio Std
• 4.3 Audio Out
OFF (default)
SDI 1
SDI 2
Component
Turns the Sidebar Keyer OFF.
Turns the Sidebar Keyer ON and selects SDI 1 as the HD input source for the Sidebar keyer.
Turns the Sidebar Keyer ON and selects SDI 2 as the HD input source for the Sidebar keyer.
Turns the Sidebar Keyer ON and selects Component In as the HD input source for the
Sidebar keyer. (The FS1 input source selected by parameter 2.1 cannot be either Composite
or S-Video when Component is chosen as the Sidebar Keyer source.)
0
+1 to +128
-128 to -1
Produces a 4:3 centered picture
Produces wider sidebars (larger number = larger sidebars)
Produces narrower sidebars (smaller number = smaller sidebars)