AJA FS1 - Manual (Page 92)

84
GPI In 2 Response (36.2), when a GPI trigger is received at pin#2
Note: For information on GPI connections, including pinout, refer to Appendix B.
GPI 1 Out (37.1)
GPI 2 Out (37.2)
No Action (default)
Freeze
SDI1 In
SDI2 In
Composite In
S-Video In
Component In
UC 14x9 Pillar
UC Fullscrn
UC LB to Full
UC Wide Zoom
UC 4x3 Pillar
DC Letterbox
DC Crop
DC Anamorph
DC 14x9
DC Auto AFD
ARC Off
ARC Lettrbox
ARC H Crop
ARC Pillarbox
ARC V Crop
ARC 14x9
FS1 performs no action if a GPI trigger is received at pin#2 (GPI DE-9 Connector)
FS1 freezes the current video frame at its outputs if a GPI trigger is received at
pin#2
FS1 selects SDI1 as the video input if a GPI trigger is received at pin#2
FS1 selects SDI2 as the video input if a GPI trigger is received at pin#2
FS1 selects Composite In as the video input if a GPI trigger is received at pin#2
FS1 selects S-Video In as the video input if a GPI trigger is received at pin#2
FS1 selects Component In as the video input if a GPI trigger is received at pin#2
When either SDI1 In, SDI2 In, Composite In, S-Video In, or Component In are selected, the
input video source selected will remain selected even after the GPI trigger is released
(deactivated).
FS1 performs upconversion of SD source to 14x9 pillarbox (see parameter 5.1)
FS1 performs upconversion of SD source to Full screen (see parameter 5.1)
FS1 performs upconversion of SD source from letterbox to Full (see parameter 5.1)
FS1 performs upconversion of SD source to a wide zoom (see parameter 5.1)
FS1 performs upconversion of SD source to 4x3 pillarbox (see parameter 5.1)
FS1 downconverts HD source to letterbox picture (see parameter 5.2)
FS1 downconverts HD source to cropped 4x3 picture (see parameter 5.2)
FS1 downconverts HD source to anamorphic picture (see parameter 5.2)
FS1 downconverts HD source to 14x9 picture (see parameter 5.2)
FS1 downconverts HD source, selecting the best downconvert mode based on the
input video's Active Format Description (AFD) code (see parameter 5.2)
FS1 SD to SD aspect ration conversion is turned off (see parameter 5.3)
Converts 16:9 Anamorphic video to Letterbox video (see parameter 5.3)
Converts 16:9 Anamorphic video to 4:3 Standard video
(crops left and right edges of video—see parameter 5.3)
Converts 4:3 Standard video to 16:9 Anamorphic video (see parameter 5.3)
Converts Letterbox video to 16:9 Anamorphic video (see parameter 5.3)
Converts 16:9 Anamorphic video to 14:9 Cropped video (see parameter 5.3)
No Action (default)
Alarm
No Video
No Ref
FS1 will not trigger a GPI 1 output trigger regardless of event
FS1 will generate a GPI 1 output trigger on pin#3 if an internal alarm condition
occurs (GPI DE-9 Connector). See Chapter 2 for alarm descriptions.
FS1 will generate a GPI 1 output trigger on pin#3 if no video is detected at its
selected input
FS1 will generate a GPI 1 output trigger on pin#3 if no video is detected at its
Ref video input
No Action (default)
Alarm
No Video
No Ref
FS1 will not trigger a GPI 2 output trigger regardless of event
FS1 will generate a GPI 2 output trigger on pin#4 if an internal alarm condition
occurs (GPI DE-9 Connector). See Chapter 2 for alarm descriptions.
FS1 will generate a GPI 2 output trigger on pin#4 if no video is detected at its
selected input
FS1 will generate a GPI 2 output trigger on pin#4 if no video is detected at its
Ref video input