AJA FS1 - Manual (Page 97)

1
89 FS1 Installation and Operation Manual — Remote FS1 Control Via a Web
messages from the FS1 to the NMS must also be specified (UDP port 162 is the
default). Two sets of Trap Destination IP and Port numbers are provided so you can
send trap messages in parallel to two NMS.
Note: Illegal data, such as out of range addresses or text, entered on the SNMP web page
will generate an error page similar to the following:
Update (Submit button)—Pressing this button requests the FS1 to update its SNMP
information with that entered on this screen.