AJA FS1 - Manual (Page 93)

1
85 FS1 Installation and Operation Manual — Remote FS1 Control Via a Web
Front Panel Lockout—When set to Locked, this setting locks out FS1 front panel access,
the same as setting 35.1 to REMOTE ONLY. This menu can only be enabled or disabled
from the web browser.
Authentication (35.2)—Setting determines whether password protection is applied to the
FS1 web browser interface.
FS1 Web Interface, Miscellaneous Screen: Authentication set to “Basic Password”
Notes:
1. AJA recommends using the Disabled setting, unless it is absolutely necessary to use the
“Basic” setting, since the authentication used is only as good as the underlying network
security. This is due to the password being sent across the network in clear text.
Unlocked (default)
Locked
Panel will respond as set in 35.1 REMOTE CONTROL
Lock out front panel access; the same as setting 35.1 to “REMOTE ONLY”
Disabled (default)
Basic Password
Selects no password protection.
Selects password protection. When selected you will be prompted for a Name and Password.
Ignore the “Name” field, but enter the correct password to allow web access. The factory
value for password is “password”—if you select “Basic Password” you will have to initially
enter the factory password before you can enter a new password using the “
Set Password”
field below Authentication. Once a password is entered, you have to additionally enter the
same exact password in the “ Confirm Password” field and then click the Change Password
button to the right of it. Please read the “Notes” below.
leave blank
enter password here