3 connecting a stirrer, Connecting a stirrer, Figure 5 – Metrohm 870 KF Titrino plus Manual User Manual
Page 20
Advertising
4.3 Connecting a stirrer
■■■■■■■■■■■■■■■■■■■■■■
10
■■■■■■■■
870 KF Titrino plus
NOTE
The electrode cable is protected against accidental disconnection of the
cable by means of a pull-out protection feature. If you wish to remove
the plug, then you must first retract the outer plug sleeve.
4.3
Connecting a stirrer
You can connect the following stirrers:
■
801 Stirrer
■
803 Ti Stand
■
804 Ti Stand (requires rod stirrer)
Figure 5
Connecting a stirrer
CAUTION
Make sure that the flat side of the plug matches the marking on the
socket.
Advertising