Metrohm 870 KF Titrino plus Manual User Manual
Page 35
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Operation
870 KF Titrino plus
■■■■■■■■
25
3 Adding sample
NOTE
Calculate the amount of the sample in such a way that a titrant
consumption of 10…90% of the cylinder volume will result.
■
If Conditioning OK is displayed, press [START].
Conditioning is stopped. The request for adding the sample will
be displayed for 8 s.
The sample must be added during this time.
■
Add the sample.
Afterward, the request for the sample size appears:
4 Entering the sample size
■
Press [OK].
The editing dialog opens.
■
Enter the sample size and apply with Accept or [BACK].
5 Starting the titration
■
Press [START].
The titration starts and the curve is displayed:
Advertising