Metrohm 870 KF Titrino plus Manual - Manual (Page 43)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 33
PC/LIMS Machine-readable report with all of the data for
a determination. This report can be saved as a
TXT file to a connected USB flash drive or sent to
a terminal program or a LIMS via an RS-232
interface. The definition is made in the system
settings (see "PC/LIMS report", page 46).
Report as in
method The reports that are defined in the method will
be printed out.
5.10 Manual control
Menu ▶ Manual control
The following functions are available in the manual control:
￭ Dosing
￭ Stirring
The available subfunctions are listed for each function in the function bar.
NOTE
The Stirrer function can only be selected if a stirrer is connected.
5.10.1 Dosing
The following dosing functions are available in the manual control:
Prepare the buret
unit (PREP) Rinse the cylinder and tubings of the buret unit
(see Chapter 10.1.2, page 70).
Continuous dosing
(DOS) Dose while the [START] key is pressed.
Dose a fixed vol-
ume (ADD) Dose a specified volume.
Preparing the buret unit (PREP)
The PREP function is used to rinse the cylinder and tubings of the buret
unit and fill them air bubble-free. You should carry out this function
before the first determination or once per day.