Metrohm 870 KF Titrino plus Manual - Manual (Page 32)

5.4 Sample data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
2 Select a method
￭ Select the desired method.
3 Export the method
￭ In the function bar, select Export and press [OK].
The method is exported. The directory structure on the USB stick is
listed in chapter 6.3, page 44.
5.4 Sample data
You can enter the sample data (identification, sample size, etc.) in a vari-
ety of ways:
￭ Directly in the main dialog.
￭ Automatic request immediately after the start of the determination (see
Chapter 5.4.2, page 23).
You can also send the sample size and the unit from a connected balance
in any case. With some balances, the sample identification and method
can be also sent (see Chapter 10.3, page 71).
5.4.1 Entering sample data in the main dialog
For a sample, you can enter the sample data directly in the main dialog,
even while the determination is running (see Chapter 5.6, page 27).
ID1
Sample identification.
Entry max. 10 characters
Default value empty