Metrohm 870 KF Titrino plus Manual User Manual
Page 45
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Operation
870 KF Titrino plus
■■■■■■■■
35
Continuous dosing (DOS)
Continuous dosing will be carried out with the DOS function for as long
as you keep the [START] key pressed down.
Proceed as follows:
1 Open the manual control
■
In the main dialog, select Menu and press [OK].
The main menu opens.
■
Select the menu item Manual control and press [OK].
Manual control opens.
2 Select the dosing function
■
Select the Dosing item.
■
In the function bar, select DOS and press [OK].
3 Configure the dosing function
NOTE
■
The dosing and filling rates should be decreased for viscous liq-
uids.
■
The maximum dosing and filling rates depend on the cylinder
volume (see Chapter 10.1.1, page 70).
■
Enter the dosing rate.
■
Enter the filling rate.
Advertising