Metrohm 870 KF Titrino plus Manual - Manual (Page 42)

5.9 Printing a report manually
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
32 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
2 Opening the print dialog
￭ Select the menu item Print reports and press [OK].
The dialog window with the available reports opens:
3 Selecting the report
￭ Select the desired report and press [OK].
The report is printed out.
The following reports can be printed out manually:
Results Result report with determination properties,
sample data, calculated results, etc.
Curve Curve report. The width of the curve is defined in
the system settings (see "Graphics width", page
46).
Measuring point
list Measuring point list report.
Parameters Report with all method parameters of the loaded
method.
System System report with system settings, solution list,
external devices, etc.
Calculations/Statis-
tics Calculation report. The statistics are also printed
out in the case of multiple determinations. The
individual determinations with the respective
sample size, the mean value, the absolute and
the relative standard deviation are printed out
for each result.