Metrohm 870 KF Titrino plus Manual - Manual (Page 31)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 21
5.3.2 Loading a method
To load a method, proceed as follows:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table with the stored templates opens:
2 Select a method
￭ Select the desired method.
3 Load the method
￭ In the function bar, select Load and press [OK].
The method is now loaded and is displayed in the main dialog under
Method.
5.3.3 Saving a method
If the method parameters are changed, then these will be saved automati-
cally. It is not possible to save a method under a different name.
5.3.4 Exporting a method
Methods can be exported to a connected USB stick.
NOTE
This function is possible only if a USB stick is connected as an external
storage medium.
To export a method, proceed as follows:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table with the stored templates opens: