Metrohm 870 KF Titrino plus Manual - Manual (Page 41)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
870 KF Titrino plus
￭￭￭￭￭￭￭￭ 31
Displaying statistical details
Additional data from the determination series can be displayed with the
Details function.
The result and the sample size of each determination are shown.
On/Off
Remove the selected determination from the statistics. The line will then
be marked with an asterisk (*), the statistics will be recalculated automati-
cally.
Deleting statistical data
All statistical data is deleted with the Reset function. The statistics data is
deleted automatically in the following cases:
￭ When all of the determinations of the determination series have been
carried out and a new determination has been started afterwards.
￭ When a new method is loaded.
Adding a determination to a determination series
You can use the function Increase to add an additional sample to a
determination series, e.g. because a determination was faulty and had to
be removed from the statistics. The second number in the Statistics line
will be increased automatically by one.
5.9 Printing a report manually
Menu ▶ Print reports
Proceed as follows to print a report manually:
1 Opening the main menu
￭ In the main dialog, select Menu and press [OK].