4 power-up methods – Metrohm 774 Oven Sample Processor User Manual
Page 42
3 Introduction
774 Oven Sample Processor, Instructions for use
36
3.3.4 POWER-UP methods
When the 774 Oven Sample Processor is switched on the sample rack and
the guide head move to their rest positions. In order to condition the com-
plete carrier gas tubing system when the instrument is switched on a
"POWER-UP" method can be used. This method is automatically started
when the instrument is switched on.
Create a method containing a command sequence which is to be carried
out when the 774 Oven Sample Processor is switched on and save this
method under the name "POWERUP" (see page 75).
In the 774 Oven Sample Processor tutorial you will find a list of the exemplary methods stored in
the instrument as standard together with comments about them.