Metrohm 774 Oven Sample Processor - Manual (Page 70)

5 Detailed description
774 Oven Sample Processor, Instructions for use 64
>auxiliaries
beaker sensor: ON
Activate or deactivate beaker sensor
ON,OFF
configuration
>oven settings
Submenu of oven settings
Open submenu with <ENTER>
>oven settings
initial temp.: OFF °C
Setting the initial temperature of the
oven after switching on
OFF, 50…250 °C OFF = Do not switch on oven heater
> oven settings
max.temperature 275 °C
Maximum possible temperature
(overheating safeguard)
50…275 °C
>oven settings
temp.correction 0 °C
Correction value for heater control
-10…0…10 °C
configuration
>rack definitions
Submenu for the definition of the individual racks
Open the submenu with <ENTER>
>rack definitions
rack number 1
Number of the rack
1…16
The number of the rack in position is automatically displayed here. If the con-
figuration of another rack must be changed, its rack number must be entered
and confirmed with <ENTER>. The rack number will be shown in the first
menu line for the subsequent entries.
>rack definitions 1
code 000001
Identification code of the rack
6 Bits
The rack code must be unique and can only occur once in the instrument.
>rack definitions 1
type : M36-0
Type description of the rack
See p. 88ff.
M36-0…
<SELECT> enables the choice of Metrohm-specific and self-defined rack
types.
Use
<QUIT>
to access next
higher level