Banner EZ-SCREEN Low-Profile Safety Light Curtain Systems - Manual (Page 12)

10
P/N 13 140443487
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
rev
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN LP
Instruction Manual
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Splitter Cordsets
Used for easy interconnection between an EZ-SCREEN LP receiver and its emitter, providing a single
“homerun” cable (see Figure 3-22). Model DEE2R-.. double-ended cordsets may be used to extend the QD
trunk or either branch. (Branch #1 and branch #2 cable sections are 300 mm/1' long.) Model QDE-8..D
single-ended cordsets may be used to extend the QD trunk for cut-to-length applications.
Model Trunk Length Wire Pinout
CSB-M1281M1281
CSB-M1288M1281
CSB-M12815M1281
CSB-M12825M1281 0.3 m (1')
2.5 m (8')
4.6 m (15')
7.6 m (25')
22 AWG/
0.33 mm²
CSB-UNT825M1281 8 m (25')
(unterminated)
Pin #1 (+24V dc)
Pin #2 (EDM#2)
Pin #3 (EDM#1)
Pin #4 (OSSD#2)
Pin #5 (OSSD#1)
Pin #6 (0V dc)
Pin #7 (GND)
Pin #8 (RESET) Pin #1 (+24V dc)
Pin #2 (EDM#2)
Pin #3 (EDM#1)
Pin #4 (OSSD#2)
Pin #5 (OSSD#1)
Pin #6 (0V dc)
Pin #7 (GND)
Pin #8 (RESET)
Pin #1 (+24V dc)
Pin #2 (EDM#2)
Pin #3 (EDM#1)
Pin #4 (OSSD#2)
Pin #5 (OSSD#1)
Pin #6 (0V dc)
Pin #7 (GND)
Pin #8 (RESET)
M12 Male
or
unterminated
M12 Female
M12 Female
300 mm
(1.0')
see
table
Male M12/Euro to Female M12/Euro QD Cordsets
Used for extending either the branch or trunk of a model
CSB splitter cordset. M12/Euro-style connectors, female to male
(rotateable). Overmold and cables are PVC-jacketed.
Model Length Wire Termination
DEE2R-81D
DEE2R-83D
DEE2R-88D
DEE2R-815D
DEE2R-825D
DEE2R-830D
DEE2R-850D
DEE2R-875D
DEE2R-8100D 0.3 m (1')
0.9 m (3')
2.5 m (8')
4.6 m (15')
7.6 m (25')
9.1 m (30')
15.2 m (50')
22.9 m (75')
30.5 m (100')
8-conductor
cable,
22 AWG/
0.33 mm² M12/Euro QD
fitting at each
end, one male,
one female
Euro/M12 QD to Flying Leads Cordsets
M12/Euro QD connector on one end; unterminated (cut to length) on other to interface with guarded
machine. PVC-jacketed overmold and cables.
Model Length Wire Termination
Banner Cordset
Pinout/Color Code
European M12
Specification*
Connector
(female face view)
For 8-Pin Emitters and Receivers** Pin Color Function Pin Color Function
QDE-815D
QDE-825D
QDE-830D
QDE-850D
QDE-875D
QDE-8100D 4.5 m (15')
7.6 m (24.9')
9.1 m (30')
15.2 m (49.8')
22.8 m (74.7')
30.4 m (99.7')
22 AWG/
0.33 mm²
8-pin Euro-
style female
connector on
one end; cut
to length
1 Bn +24V dc
2 Or/Bk EDM #2 (Aux)
3 Or EDM #1
4 Wh OSSD #2
5 Bk OSSD #1
6 Bu 0V dc
7 Gn/Ye Gnd/Chassis
8 Vi Reset
1 Wh +24V dc
2 Bn EDM #2 (Aux)
3 Gn EDM #1
4 Ye OSSD #2
5 Gy OSSD #1
6 Pk 0V dc
7 Bu Gnd/Chassis
8 Rd Reset
* * The European M12 Specification pin assignment and color codes are listed as a customer courtesy. The user must verify suitability of these cables for each application.
1
7
6
5
4
3
2
8
DEE8-..D Adaptor M12/Euro QD Cordsets
Used to connect 8-pin female QD to a 4-pin or 5-pin cordset
or QD connection to a safety BUS gateway/node, a “smart” self-
monitored safety module, safety controller, or safety PLC. Overmold
and cables are PVC-jacketed.
Model Length Wire Pinout
DEE8-41D
DEE8-48D
DEE8-415D
DEE8-425D 0.3 m (1')
2.5 m (8')
4.6 m (15')
7.6 m (25') 4-conductor
cable,
22 AWG/
0.33 mm²
DEE8-51D
DEE8-58D
DEE8-515D
DEE8-525D 0.3 m (1’)
2.5 m (8’)
4.6 m (15’)
7.6 m (25’) 5-conductor
cable,
22 AWG/
0.33 mm²
* DEE8-4..D cordsets do not have the pin 5 GND/chassis connection. GND/chassis
connection should be made via the mounting hardware.
8-Pin
Female
1
2
3
4
5
6
7
8
5-Pin
Male
1
2
4
3
5*
to