Banner EZ-SCREEN Low-Profile Safety Light Curtain Systems - Manual (Page 16)

14
P/N 133487
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
14
P/N 140044 rev.
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN LP
Instruction Manual
P/N 140044 rev. E
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Accessory Mounting Brackets
See Section 2.5 for standard brackets (included with sensors).
LPA-MBK-13
• Adaptor for side-mount bracket LPA-MBK-12
• Reorients sensor rotation by 90° (+10°/ −30°)
• 14 ga (1.9 mm) steel, black zinc plated
• Includes 1 bracket and hardware
LPA-MBK-20
• Universal adapter bracket for mounting to
engineered/slotted aluminum framing (e.g.,
80/20
™ , Bosch )
• Retrofit for Banner MS/US/MG; clearance for M4
and M6 hardware
• Use with LPA-MBK-11, -12, or -13
• 12 ga (2.66 mm) steel, black zinc plated
• Includes 1 bracket and hardware
LPA-MBK-22
• End-cap bracket for mounting sensor inside
Unistrut ® metal framing; uses end-cap plates
from bracket LPA-MBK-11
• Fits Unistrut P1000 size, with M6 or 1/4"
channel nuts
• 14 ga (1.90 mm) steel, black zinc plated; die-
cast zinc clamps
• Includes 2 brackets and hardware
LPA-MBK-21
• Pivoting “L” bracket system for two cascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
• Adjustable 90° to 180° orientation; resolution is
25 mm at < 135°, 28 mm at 120°, and 32 mm at
90° configuration. (Resolution between sensors
at the pivot point can be as large as 32 mm.)
• +10°/ −30° sensor rotation
• 14 ga (1.9 mm) steel, black zinc plated
• Cascade brackets join two sensors. Each model
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-90
• Fixed angled “L” bracket for two cascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
• Fixed 90° orientation; maintains 25 mm
resolution between sensor pairs
• +10°/ −30° sensor rotation
• 14 ga (1.9 mm) steel, black zinc plated
• Cascade brackets join two sensors. Each model
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-120
• Fixed angled “L” bracket for two cascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
• Fixed 120° orientation; maintains 25 mm
resolution between sensor pairs
• +10°/ −30° sensor rotation
• 14 ga (1.9 mm) steel, black zinc plated
• Cascade brackets join two sensors. Each model
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-135
• Fixed angled “L” bracket for two cascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
• Fixed 135° orientation; maintains 25 mm
resolution between sensor pairs
• +10°/ −30° sensor rotation
• 14 ga (1.9 mm) steel, black zinc plated
Cascade brackets join two sensors. Each model
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-180
• Fixed inline (straight) bracket for two cascaded
emitters or receivers; uses clamps from side-
mount bracket LPA-MBK-12. Order one per
cascaded joint; set includes two brackets.
• Fixed 180° orientation; maintains 25 mm
resolution between sensor pairs
• +10°/ −30° sensor rotation
• 14 ga (1.9 mm) steel, black zinc plated
• Cascade brackets join two sensors. Each model
number is one set of 2 (mirror image) brackets
and hardware.
LPA-MBK-Pxxx
• L-shaped bracket for one emitter or receiver
protects sensor from weld flash, impact.
• Sized to match sensor length; replace “xxx”
in model number with sensor size (e.g., LPA-
MBK-P270 for use with sensor SLP..-270..);
bracket studs mate with side-mount brackets
LPA-MBK-12, included with sensor. Corner
notch accommodates cable routing.
• +10°/ −30° sensor rotation
• 12 ga (2.66 mm) steel, black zinc plated or
painted
• One bracket and hardware.