Banner EZ-SCREEN Low-Profile Safety Light Curtain Systems - Manual (Page 17)

P/N 1
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN LP
Instruction Manual
P/N 140044 rev. E 15
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
MSM Series Corner Mirrors
Rear-surface glass mirrors rated at 85% efficiency. The total sensing range decreases by
approximately 8% per mirror. See mirror data sheet P/N 43685 or the Banner Safety catalog
for further information.
Defined Area
Length
Mirror
Model Reflective Area
Y
Mounting
L1
Height
L2
270 mm (10.6") MSM12A 356 mm (14") 411 mm (16.2") 381 mm (15")
410 mm (16.1") MSM20A 559 mm (22") 615 mm (24.2") 584 mm (23")
550 mm (21.7") MSM24A 660 mm (26") 716 mm (28.2") 686 mm (27")
690 mm (27.2") MSM28A 762 mm (30") 818 mm (32.2") 787 mm (31")
830 mm (32.7") MSM36A 965 mm (38") 1021 mm (40.2") 991 mm (39")
970 mm (38.2") MSM40A 1067 mm (42") 1123 mm (44.2") 1092 mm (43")
1110 mm (43.7") MSM44A 1168 mm (46") 1224 mm (48.2") 1194 mm (47")
NOTE: Brackets may be inverted from the
positions shown above, decreasing
dimension L1 by 58 mm (2.3").
Y
L1
L3
L2
Y
101.2 mm
(3.98")
100 mm
(3.94")
115 mm
(4.53")
M6 x 19 mm
screw
(4 supplied)
M5 x 10 mm
screw
(4 supplied)
SSM Series Corner Mirrors
• Rear-surface glass mirrors rated at 85% efficiency. The total sensing range decreases by
approximately 8% per mirror. See mirror data sheet P/N 61934 or the Banner Safety catalog
for further information.
• Robust construction, two mounting brackets and hardware included.
• EZA-MBK-2 adapter bracket is required for use with MSA Series stand, see page 14.
Defined Area
Length
Mirror
Model*
Reflective Area
Y
Mounting
L1
Height
L2
270 mm (10.6") SSM-375 375 mm (14.8") 486 mm (19.1") 453 mm (17.8")
410 mm (16.1") SSM-550 550 mm (21.7") 661 mm (26.0") 628 mm (24.7")
550 mm (21.7") SSM-675 675 mm (26.6") 786 mm (31.0") 753 mm (29.6")
690 mm (27.2") SSM-825 825 mm (32.5") 936 mm (36.9") 903 mm (35.6")
830 mm (32.7") SSM-975 975 mm (38.4") 1086 mm (42.8") 1053 mm (41.5")
970 mm (38.2") SSM-1100 1100 mm (43.3") 1211 mm (47.7") 1178 mm (46.4")
1110 mm (43.7") SSM-1175 1175 mm (46.3") 1286 mm (50.6") 1253 mm (49.3")
1250 mm (49.2") SSM-1400 1400 mm (55.1") 1511 mm (59.5") 1478 mm (58.2")
1390 mm (54.7") SSM-1475 1475 mm (58.1") 1586 mm (62.4") 1553 mm (61.1")
1530 mm (60.2") SSM-1675 1675 mm (65.9") 1786 mm (70.3") 1753 mm (69.0")
1670 mm (65.7") SSM-1750 1750 mm (68.9") 1861 mm(73.3") 1828 mm (72.0")
1810 mm (71.3") SSM-1900 1900 mm (74.8") 2011 mm (79.2") 1978 mm (77.9")
* Stainless steel reflective surface models also available by adding model number suffix “-S” (e.g., SSM-375-S); range reduction for these
models is approximately 30% per mirror. See data sheet p/n 67200.
L1
53.8 mm
(2.12")
L2
Y
50.8 mm
(2.00")
72.9 mm
(2.87")
M4 x 10 mm
Screw
(8 supplied)