ADS Environmental Services Spider QR 775010 A0 - Manual (Page 50)

ADS Environmental Services ADS Spider User Manual
Page 48
“
ABOVE
”
,
“
BELOW
”
, or a rate of change. Please refer to
Appendix A: ADS Spider Inputs on page 83 for details on
input types and their triggering ability.
7. Alarms can initiate sending of Automatic reports (if installed).
Please refer to Automatic Reports on page 72 in Advanced
Operation for more information.
Setting up Network Parameters
The Spider can connect to local area networks (LAN) and wide area
networks (WAN). LAN connections are primarily used for
communication with local computers. The Spider uses WAN
connections to access the Internet in order to send e-mails and FTP
reports. WAN settings also support Web access when an AT&T static
IP address SIM is installed.
LAN Settings
Please refer to Appendix C: Local Network Configuration on page 87
for more information about initial connection of a Spider to a Local
Area Network (LAN).
To set up Network parameters, access the
“
Change Settings
”
page,
as described in Setting up a Spider for the First Time on page 32.
Click on
“
Change Network Settings
”
.
Fill in the form with details appropriate for your network.
You will need to obtain this information from your network
administrator.