ADS Environmental Services Spider QR 775010 A0 - Manual (Page 81)

ADS Environmental Services ADS Spider User Manual
Page 79
As an example, we will consider a system comprising two Spiders.
The local Spider is measuring water level. Depending on the water
level, the local Spider sends text message commands to the remote
Spider to start and stop a pump controlled by the remote Spider.
There is no special setup required for the remote Spider. We will
assume that the pump is controlled by CONTROL 3.
Assume that the remote pump should be on when the local water
level is below 1 meter (39 inches) and off if the level is at or above 1
meter (39 inches).
Setup a local Spider input to measure the water level.
Set an alarm to perform the pump activation as follows: