B&G H2000 Pilot *DISCONTINUED* - Manual (Page 152)

h2000 User Manual
152 HB-0845-06
3. Using the Scroll Up Key cycle through the 14
pre-set functions until the required function is
displayed on the FFD. Release the Scroll Up Key.
4. If the function is missed, press and hold down the
Scroll Up Key and the functions will cycle
through in reverse order. Release the Scroll Up
Key when the required function is displayed.
5. Press the Page Key. The FFD will now return to
normal operation and the 40/40 will display the
selected function.
5.6.5 Re-configuring the 40/40 Display
In addition to the 14 pre-set functions, any 40/40 pre-set
function may be re-configured to show any other function
available to the system. This feature allows any 40/40 to be
set-up to show the information most useful to the user at
that station in the yacht.
The procedure for re-configuring a 40/40 function is as
follows:
1. At the FFD, press and hold down the Page Key
for at least 3 seconds. The FFD will change to
show the function displayed on the 40/40 together
with the display number.
2. Using the Scroll Down Key, cycle through each
40/40 display in turn (display flashes) and stop at
your desired choice.
3. Using the Scroll Up Key select the function you
wish to change.
4. Press the Enter Key and the function currently
being displayed on the 40/40 will start to flash.
5. Press and hold the Scroll Up Key and cycle
through the normal FFD Menu until the required
function choice is displayed (e.g. NAVIGATE).