B&G H2000 Pilot *DISCONTINUED* - Manual (Page 41)

HB-0845-06 41
4. Press Scroll Up until upper text shows LO
ALARM flashing.
5. Press Enter, the display shows current LO
ALARM value.
6. To change the LO value press Enter, the value
flashes.
7. Press Scroll Up or Scroll Down to increase or
decrease the value as required. Press Enter to
accept the new value and switch the alarm ON.
8. Press Page to return to full display.
To access the HI ALARM, press Scroll Up until HI
ALARM appears and press Enter to reveal current HI
ALARM value. To change the value, use the same
procedure as used to change the LO ALARM value.
2.5.4 Switch Alarms On/Off
To switch an alarm OFF (HI, LO or SECTOR) press Scroll
Up until the required item (e.g. HI OFF) appears in the text
and press Enter.
To switch an alarm ON press Scroll Up until the required
item (e.g. LO ON) appears in the text and press Enter.
2.5.5 Disable Alarms
1. Select any function with an alarm facility, e.g.
DEPTH.
2. If the function is in the upper display, press Scroll
Down to ALARMS, or if the function is on the
lower display use the Scroll Up Key. Then press
Enter and ALL OFF appears flashing.
3. Press Enter again, all alarms are switched OFF
and the normal page display will be restored.