B&G H2000 Pilot *DISCONTINUED* - Manual (Page 196)

h2000 User Manual
196 HB-0845-06
#NS,1,HDM,10(CR)
sets the output rate of HDM on port 1 to ten times a second.
At present the only sentence formatter that is recognised is
HDM, and the output rates can only be 0, 1, or 10. An
output rate of 0 turns HDM off.
5.15.34 Displaying the Software Version Number
#RV,nn(CR)
causes the software version number of node nn to be output
in the format:
RV,nn,vv(CR)
where
nn is the node number
vv is the version number (in hexadecimal)
Example:
#RV,9(CR)
gives
RV,9,75(CR)
if version 7.5 software is fitted to the Performance Unit.
Not all Hercules units respond to version number requests,
so some nodes will return version 00.
5.15.35 RS232 Error Messages
If a command is incorrectly entered or has a parameter out
of range then an error message of the following form will be
output on RS232: