B&G H2000 Pilot *DISCONTINUED* - Manual (Page 89)

HB-0845-06 89
2. Press Enter, the upper text now shows STD LOG
flashing.
3. Press Scroll Up until the upper text shows TRIP
LOG flashing.
4. Press Enter, the upper text shows TRIP LOG and
the current value.
5. Press Scroll Down until the lower text shows
CALBRATE flashing.
6. Press Enter, the lower text now shows CAL VAL
1 flashing.
7. Press Scroll Down repeatedly and the lower text
will cycle through CAL1, VAL 1, CAL VAL 2,
and CAL VAL 3.
When CAL VAL 1 is displayed:
8. Press Enter, the lower text shows SPD KTS.
When CAL VAL 2 is displayed:
9. Press Enter, the lower text shows SPD MPH.
When CAL VAL 3 is displayed:
10. Press Enter, the lower text shows SPD KPH.
For whichever selection is made:
11. Press Enter, the lower text now shows SPD KTS,
SPD MPH, or SPD KPH with the current boat
speed value in its original units.
12. Press Enter, the current boat speed value, in its
original units, will flash.
13. Press Enter, the current boat speed will be
converted to and displayed in the newly selected
units.