B&G H2000 Pilot *DISCONTINUED* - Manual (Page 58)

h2000 User Manual
58 HB-0845-06
4. Sensor alignment calibration.
5. Moving card analogue meter available.
This is your compass heading, derived directly from the
Halcyon Gyro Stabilised Compass, Halcyon 2000 Compass
or valid NMEA heading input which allows calculation of
true wind direction, dead reckoning and other course related
navigation functions.
Heading fulfils a very important tactical role, and it does
this best when connected to the Halcyon Display. This
permanently shows heading in a digital form and has a
segmented bar graph display to show off course.
2.9.21 Heading on Opposite Tack
Menu heading: PERFORM
Function text: OPP TACK
Update rate: 1Hz
Units: ºM or ºT
This informs you of the heading you would be sailing on the
opposite tack, and can therefore be used in conjunction with
a hand-bearing compass to confirm that you are on the
layline. This is calculated from the true wind angle and
compass heading.
2.9.22 Head Lift Trend
Menu heading: WIND
Function text: LIFT/HDR
Update rate: 1Hz
Units: Degrees
Notes
1. Requires Halcyon Display.
2. Analogue indicator available.
3. Can be reset on any FFD via the following:
WIND
→ → → →
LIFT/HDR, CONTROL
→ → → →
RESET