Baseline Systems FreeWave Ethernet Radio - Manual (Page 101)

LUM0024AB Rev A
Chapter 8: Viewing Transceiver Status
and Statistics
A Plus-style transceiver's status and statistics are available on the Status page in the configuration Web
pages. The parameters available on this page are all view-only regardless if you are logged in as an
administrator or as a guest.
The transceiver model, IP address, MAC (hardware address), and serial number display at the top of each
Web page. In addition, below the MAC address, each page lists the user who is currently logged in and the IP
address from which you are logging into the transceiver.
Using the Diagnostic configuration Web page, you can also view the signal level, noise level, signal-to-noise
difference, and receive rate for each frequency available on the transceiver.
Note: When viewing diagnostic information for a Point-to-MultiPoint Gateway, the
header page always displays "I am currently not connected."
You can also view a transceiver's status information within the Discovery Server application. For more
information, see "Viewing Diagnostic Information in Discovery Server" on page 117.
85