Baseline Systems FreeWave Ethernet Radio - Manual (Page 39)

User Manual and Reference Guide
LUM0024AB Rev A
Note: You cannot change the group assigned to the admin user. The admin user
always has Full Access to all pages.
To edit user group rights using Tool Suite:
1. Access the transceiver's settings in Tool Suite.
For more information, see "Reading Plus-Style Transceivers in Tool Suite" on page 18.
2. Click the Users tab to display the User settings.
3. For each level, select the access rights for each group of parameters.
For example, the Level 1 Account IP Setup field represents Group 1's access rights to the IP
Setup page or tab.
Your changes are saved automatically as you make them. However, be sure to apply them to the
transceiver.
To edit user group rights through the configuration Web pages:
1. Access the transceiver's Web page.
For more information, see "Accessing Configuration Web Pages" on page 19.
2. Click Users in the Pages menu to display the Users page.
3. In the Edit Group Level Rights section of the page, use the drop-down menus in each group to
select the access rights for each page.
4. Click Save/Apply to save your changes and apply them to the transceiver.
Adding and Deleting Users
Note: You can only create and edit users using the configuration Web pages.
You can set up to nine custom users with login access to a Plus-style transceiver. The tenth login is the
permanent admin login.
To add a user:
1. Access the transceiver's Web page.
For more information, see "Accessing Configuration Web Pages" on page 19.
2. Click Users in the Pages menu to display the Users page.
3. At the bottom of the User Accounts section of the page, click the green plus icon or click Add
User.
4. In the dialog box that displays, enter the following user information:
Field Description
User Name A name that identifies the user, for example guest or a
user's first initial and last name.
User Level Select 1, 2, or 3 to assign the user to a group. For more
information, see "Defining User Groups" on page 22.
Password and Confirm
Password The user password to enter when accessing restricted
pages.
23