Baseline Systems FreeWave Ethernet Radio - Manual (Page 36)

FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
Any change made in the configuration Web pages that is not yet
saved is highlighted in yellow. This highlight indicates that you
need to click Save/Apply before navigating away from the
page, or the changes will be lost.
Some setting changes (such as changes to the IP Setup) require a reboot to complete
the changes. When such a change is made, the Change Succeeded message below
the Reboot button changes to include a link labeled Reboot Required. Click either the
Reboot Required link or the Reboot button to reboot the transceiver and apply the
requested changes. The requested changes are not made until the transceiver is
rebooted. A Reboot Required link displays at the top of every page until the
transceiver is rebooted.
Providing Site Information
For each transceiver in your network, you can provide information to help identify that transceiver, such as a
name and contact information. The site information displays on the Status page in the configuration Web
pages.
To provide site information in Tool Suite:
1. Open Tool Suite and connect to the transceiver you want to set.
For more information, see "Reading Plus-Style Transceivers in Tool Suite" on page 18.
2. Ensure the Configuration application is displayed and click Read Radio to read the transceiver's
current settings.
3. Click the Tools tab.
4. Provide any of the following information in the fields provided:
Field Description
Site Name Enter any text up to 25 characters that helps to identify the
transceiver.
Site Contact Enter any text up to 25 characters that provides information
about who to contact about the site's status.
System Name Enter any text up to 32 characters that helps to identify the
system in which the transceiver operates.
Notes Enter any additional text up to 50 characters about the
transceiver or the site.
5. Select a Tool Suite program option to send the changes to the transceiver. For more information
about using Tool Suite, see the Tool Suite User Manual available on the User Manual and System
Tools CD or by selecting File > Help in the Tool Suite software.
To provide site information in the configuration Web page:
1. Access the radio's configuration Web pages.
For more information, see "Accessing Configuration Web Pages" on page 19.
20