Baseline Systems FreeWave Ethernet Radio - Manual (Page 37)

User Manual and Reference Guide
LUM0024AB Rev A
2. In the Pages menu on the left side, click Tools to display the Tools page.
3. In the Change Site Information section of the page, provide any of the following information:
Field Description
Site Name Enter any text up to 25 characters that helps to identify the
transceiver.
Site Contact Enter any text up to 25 characters that provides information
about who to contact about the site's status.
System Name Enter any text up to 32 characters that helps to identify the
system in which the transceiver operates.
Notes Enter any additional text up to 50 characters about the
transceiver or the site.
4. Click Change Site Information to save your changes.
Using the MultiPoint Gateway to Change All Connected Transceivers
Note: The Global Change function can only be enabled or disabled using the
configuration Web pages.
Often, the settings on transceivers in your network should be the same as the settings in the MultiPoint
Gateway. Instead of changing each transceiver individually, you can use the Global Change function to push
the IP Setup, Radio Setup, Security, SNMP, and User settings to all connected transceivers in the network.
1. Access the Gateway's configuration Web pages. For more information, see "Accessing
Configuration Web Pages" on page 19.
2. In the Pages menu on the left side, click Tools to display the Tools page.
3. Click ENABLE Global Change Functionality in the middle of the page.
The button now displays DISABLE Global Change Functionality. Click that button to turn off
global changing.
When enabled, the following message displays at the top of every page for transceivers connected
to the Gateway.
On the pages that allow Global Changes, the Save/Apply button is replaced by the Push Locally button.
Any changes made to the parameters on that page are pushed to all the connected transceivers when you
click Push Globally.
Note: The settings on the MultiPoint Gateway are not changed during a Global
Change.
Note the following when the Global Change functionality is enabled:
l
IP Setup page - The IP Address field becomes hidden, as it cannot be part of a Global Change.
l
Radio Setup page - The Network Type and Modem Mode fields are hidden, as they do not
change as part of a Global Change.
21