Baseline Systems FreeWave Ethernet Radio - Manual (Page 128)

FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
Installing and Running the TFTP Sever
Note: FreeWave TFTP Server requires WIndows 98/2000/XP with Microsoft Installer
2.0 or higher.
1. Double-click the “fwTFTP Install.msi” program.
2. Follow the onscreen wizard to complete the installation.
If you accept the default installation directory, the program is installed in C:\Program
Files\FreeWave Technologies\fwTFTP.
3. From the Windows Start menu, select All Programs > FreeWave Technologies >fwTFTP >
fwTFTP.exe to open the application.
All existing client connections are dropped when the program closes. The log file is not erased when the
program is restarted.
The installer automatically creates an uninstall entry in the Windows Add or Remove Programs list. Use this
option to uninstall the application, if necessary.
If the Windows Firewall is enabled, the notice below displays when you run the TFTP Server for the first time.
To allow the server to run, click Unblock. This message does not display if the Windows Firewall has been
disabled.
TFTP Server Client Connections
The top half of the TFTP Server window is a list of active client connections. Each connection shows the IP
address of the client and the UDP port number the server is using to communicate with the client along with
the following information:
Column Description
Action Shows what the client is currently doing, for example, getting a file.
Progress Shows a green progress bar that indicates the progress of a file transfer.
Kbytes/sec Shows the current file transfer speed.
112