Baseline Systems FreeWave Ethernet Radio - Manual (Page 52)

FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
Options: Any valid VLAN ID between 1 and 4095.
Description: Computers and devices using the VLAN ID entered here are able to access
the transceiver’s Setup pages, receive SNMP information, send SNMP
commands, and view the transceiver in the FreeWave Discovery Server.
VLAN Mode
Web Parameter: Mode in the VLAN Configuration (Data) section of the IP Setup page.
Network Type: Both
Default Setting: Disabled
Options:
l
Disabled - VLAN will not be used.
l
Tagged - If the data coming into the transceiver’s local Ethernet port is
tagged with a VLAN ID, select this option. The transceiver bridges the data,
leaving the VLAN ID as-is.
l
Untagged - If the data coming into the transceiver's local Ethernet port is
not tagged with a VLAN ID, select this option. The transceiver accepts the
data, tags it with the VLAN ID entered in the Data VLAN ID field, and
sends it across the radio link. Data arriving at this transceiver and being
sent out of the local Ethernet port has any VLAN tag removed before being
sent out of the port
Description: Determines whether VLAN is active and in which mode it is used.
Note: Not every network needs or uses VLAN IDs. The Mode setting is
normally kept at Disabled. Your network administrator should approve any
changes.
VLAN Subnet Mask
Web Parameter: Subnet Mask in the VLAN Configuration (Data) section of the IP Setup page.
Network Type: Both
Default Setting: Blank
Options: Any IPV4 net mask address.
Description: The subnet mask for the Data VLAN IP address, for example 255.255.255.0.
Web Page Port (http)
Web Parameter: Web Page Port on the IP Setup page.
Network Type: Both
Default Setting: 80
Options: Any valid TCP port from 1 to 65535.
36