Baseline Systems FreeWave Ethernet Radio - Manual (Page 89)

User Manual and Reference Guide
LUM0024AB Rev A
Options: Any free form text up to 16 characters long.
Description: A user-defined encryption key for the 128-bit AES encryption.
128-bit AES encryption is always enabled, although the encryption key may be
blank.
When changing the AES encryption key globally, first make the change on the
MultiPoint Gateway. After the Gateway has been changed you can push the
new key to the other transceivers. If not done in this order, this change can
cause transceivers to lose connectivity with the Gateway for an extended
period of time. For more information about global changes, see "Using the
MultiPoint Gateway to Change All Connected Transceivers" on page 21.
Detach Local Ethernet
Web Parameter: Detach Local Eth in the Misc section of the Security page.
Network Type: Both
Default Setting: Disabled
Options: Disabled, Enabled
Description: If enabled, the physical Ethernet port on the transceiver is disabled. With this
setting enabled, the transceiver can only be contacted via the radio link.
Force SSL (https)
Web Parameter: Force SSL in the Misc section of the Security page.
Network Type: Both
Default Setting: Disabled
Options: Disabled, Enabled
Description: If enabled, redirects any HTTP requests to the configuration Web pages
through an HTTPS link using SSL. Web page performance is slower with this
option enabled, due to the encryption requirements.
MAC Filter
Note: Available only in the Security configuration Web page or through HyperTerminal.
Web Parameter: MAC Filter in the MAC Filter section of the Security page.
Network Type: Both
Default Setting: Blank
Options: Any valid MAC address.
Description: Devices with MAC addresses in the MAC Filter list are permitted to
communicate over the Ethernet port of the transceiver. Any other traffic is
refused. If the MAC Filter list is blank, all traffic is allowed. This list is specific
for each transceiver.
73