Baseline Systems FreeWave Ethernet Radio - Manual (Page 42)

FGR2-PE Wirelss Data Transceiver
LUM0024AB Rev A
4. Click OK and verify that the folder is listed in the Root Folder field.
5. Click OK to return to the main TFTP Server window.
6. Click Start Server in the upper left of the TFTP Server window.
If the button and text are gray, the server is started.
7. Minimize (do not close) the FreeWave TFTP Server window and continue with "Upgrading
Firmware Using the Web Configuration Pages" on page 26.
Upgrading Firmware Using the Web Configuration Pages
After you have configured the FreeWave TFTP Server, you are ready to complete the firmware upgrade using
the transceiver's configuration Web pages.
1. Access the radio's configuration Web pages.
For more information, see "Accessing Configuration Web Pages" on page 19.
2. In the Pages menu on the left side, click Tools to display the Tools page.
3. In the Address of TFTP Server field in the TFTP Firmware Upgrade section of the page, the
IP address of the computer on which the TFTP Server is installed (not the transceivers's
IP address).
4. In the File Name field, enter the exact name of the firmware upgrade file you saved in the Root
directory on your desktop in "Before You Get Started Upgrading Firmware Using the TFTP Server"
on page 25.
If the file name includes an extension, such as .bin, include that in the name. For example, http2_
22.bin.
5. Click Upgrade Firmware.
The transceiver attempts to retrieve the firmware file from your computer. To verify that this is
working properly, or to see the status of the firmware retrieval, open the FreeWave TFTP Server
application that you minimized.
26