Rice Lake 480 Legend Series Digital Weight Indicator Installation Manual - Manual (Page 12)

8 480 Operator’s Manual
1.5.11 Enter New Unit ID
1. Press .
2. Press to AUDIT.
3. Press twice to UNIT ID.
4. Press to view the current value.
5. To enter/edit Unit ID value:
• Press or to select the digit.
• Press or to increment or decrement the value.
• Press when the value is correct.
6. Press repeatedly to return to weighing mode.
1.5.12 Display Accumulator
1. Press .
2. Press to AUDIT.
3. Press until display reads ACCUM.
4. Press to display VIEW.
5. Press or to select desired parameter (VIEW, TIME, DATE, PRINT, CLR Y).
• Press to view last accumulation for VIEW, TIME or DATE.
• Press to return to selected parameter.
• Press , then to PRINT or CLEAR the accumulator.
6. Press repeatedly to return to weighing mode.
See Section 3.2 for the ACCUM menu structure.
If the accumulated value exceeds 999999, display show “EE ACC”. The value will still be correct and will print
correctly up to 1,000,000,000.
1.5.13 Display or Change Time and Date
To set the date and time:
1. Press .
2. Press to AUDIT.
3. Press until display reads TIMDAT (TIME/DATE).
4. Press and select Time or Date with or .
5. Press to view the current setting.
6. To edit the value of the time in 24 hour or 12 hour format (hhmm):
• Press or to select the digit.
• Press or to increment or decrement the value.
• Press when the value is correct.
Use the same procedure to enter the date in the same format configured for the indicator.
See Section 3.3.4 for available formats.
7. Press repeatedly to return to weighing mode.
The time and date are backed up with an internal battery. If the main power is interrupted, time and date will
not be lost.
When in 12 hour format, the PT LED indicates pm setting.
MENU
TARE
MENU
TARE
TARE
Note
MENU
TARE
Note